4
The Execute Color Check dialog box is displayed.
Select Pattern Size.
To increase the precision of the color check, we recommend
that you configure the same settings as when Auto Adjust
(High Precision) was executed in color calibration. (See "Ex-
ecuting Color Calibration.")
➔P.818
5
Click the OK button.
6
When the Execute Color Check dialog box is displayed, check
the details.
7
Click the Execute button.
The color check is executed.
Note
• You can exit the color check in the middle by clicking the Cancel button. However, it may take some time to end.
8
Check the results.
iPF8400S
Executing Color Check
User's Guide
Color Management Color Calibration Management Console (Windows)
831
To Next Page
Loading...
