Canon imagePROGRAF iPF8400S User Manual

Confirm the message
When the Maintenance Cartridge is almost empty, a message is shown on the Display Screen. According to the mes-
sage, replace the Maintenance Cartridge or prepare a new Maintenance Cartridge. (See "When to Replace the Mainte-
nance Cartridge.") ➔ P.906
If a message is displayed requesting Maintenance Cartridge replacement, you can skip the step Access the menu for
Maintenance Cartridge replacement. Follow the instructions in Replace the Maintenance Cartridge.
Access the menu for Maintenance Cartridge replacement
1
On the Tab Selection screen of the Control Panel, press ◀ or ▶ to se-
lect the Settings/Adj. tab (
).
Note
• If the Tab Selection screen is not displayed, press the Menu button.
2 Press the OK button.
The Set./Adj. Menu is displayed.
3 Press ▲ or ▼ to select Maintenance, and then press the OK button.
4 Press ▲ or ▼ to select Repl. maint cart, and then press the OK button.
Instructions are displayed on the Display Screen.
iPF8400S Replacing the Maintenance Cartridge
User's Guide
Maintenance and Consumables Maintenance Cartridge
899

Canon imagePROGRAF iPF8400S Specifications

General

Maximum Print Resolution	2400 x 1200 dpi
Ink Type	Pigment-based
Number of Ink Colors	8
Maximum Media Width	44 inches
Operating Systems Supported	Windows, macOS
Print Technology	Inkjet
Connectivity	USB 2.0
Media Sizes	Roll Paper: 10"-44"
Media Types	Glossy photo paper, Matte photo paper, Proofing paper
Ink Cartridge Capacity	130 ml
Power Consumption	190W or less (printing)
Ink Cartridge Configuration	MBK, C, M, Y, PC, PM, GY