Canon imagePROGRAF iPF8400S User Manual

5 In the AMedia Type list, select the type of paper that is loaded. In this case, click Canon Heavyweight Coat-
ed Paper.
6 Select the print target in the EPrint Target list.
Important
• When you are using paper that takes longer for ink to adhere for borderless printing and the Cutter Unit touches
printing surfaces that are not dry yet, it may damage the paper or the edge of the document that is cut, depending
on frequency of use. In this kind of situation, change the ink drying time using the following procedure.
• Click Advanced Settings in Media Type.
• Select an ink drying time in the list for the Between Pages setting of Drying Time.
7
Click the Page Setup tab to display the Page Setup
sheet.
8 In the APage Size list, click the size of the original as specified in the application. In this case, click ISO A4.
9 Select and click a roll paper in the LPaper Source list.
10
Select the BBorderless Printing check box to display
the Information dialog box.
11 Select the width of the loaded roll in the Roll Paper Width list—in this case, click 10-in. Roll (254.0mm).
Borderless Printing by Resizing Originals to Fit the Roll Width (Windows) iPF8400S
User's Guide
Enhanced Printing Options Borderless Printing
94

Canon imagePROGRAF iPF8400S Specifications

General

Maximum Print Resolution	2400 x 1200 dpi
Ink Type	Pigment-based
Number of Ink Colors	8
Maximum Media Width	44 inches
Operating Systems Supported	Windows, macOS
Print Technology	Inkjet
Connectivity	USB 2.0
Media Sizes	Roll Paper: 10"-44"
Media Types	Glossy photo paper, Matte photo paper, Proofing paper
Ink Cartridge Capacity	130 ml
Power Consumption	190W or less (printing)
Ink Cartridge Configuration	MBK, C, M, Y, PC, PM, GY