Canon MK5000 - Page 149

145
Contents
Preparation/
Setup
Print Using a
Computer
Appendix
IndexPrint/SaveInput/Edit
Names of
Components
Maintenance/
Printer Settings
Trouble-
shooting
4
If you are printing data stored on your computer, open the  le.
(P.131)
5
Select the print media and media size.
󱾀
When you change the print media and media
size, the settings will be re ected in the
preview area display.
NOT
E
• Except for labels/plates, the minimum set length is 8 mm. If
there are pages of 8 mm or less in the data list and the print
media is changed to one other than label/plate, a message
to change the set length to 8 mm will be displayed.
• When the plate printing area is set to "Expansion," the print media cannot be changed. In this case,
change the plate printing area to [Normal].
(P.138)
• If the print area is exceeded, the message "Exceeding the print area" will be displayed in the preview
area. Change the print media or change the format setting.
(P.138)
• If you want to set a tube that is not on the list of media sizes, refer to
"Tube Size Selection
(Recommended) (P.80)"
.