Canon MK5000 - Adjustment of Printing Results; Fine Adjustment of Print Position and Cut Length

85
Contents
Preparation/
Setup
Print Using a
Computer
Appendix
IndexPrint/SaveInput/Edit
Names of
Components
Maintenance/
Printer Settings
Trouble-
shooting
Adjustment of Printing Results
Fine Adjustment of Print Position and Cut Length
Depending on your print media and the environment, the print position may be shifted or cut
length may be di erent from the setting. If you cannot get the result you expected even after
setting the cut length and margins,  ne-tune the print position and cut length.
For this product, the following adjustments can be set for each type of print media (for vertical
adjust, by type and by size).
Function Details
Top adjust Fine-tune the print start position.
Vertical adjust Fine-tune the print position in the vertical direction.
Length adjust Fine-tune the cut length.
IMPORTANT
• If the situation is not improved by adjusting the adjustment function, clean the transport roller.
(P.185)
Also, make sure that there is no dirt on the print media.