Canon MK5000 - Saving the Data Held in the Printer

171
Contents
Preparation/
Setup
Print Using a
Computer
Appendix
IndexPrint/SaveInput/Edit
Names of
Components
Maintenance/
Printer Settings
Trouble-
shooting
Saving the Data Held in the Printer
The data sent to the printer will be retained in the character input display. This section describes
the procedure for saving the data retained in the character input display, such as when saving
the previously printed data.
NOT
E
• For the procedure to save the print data to a folder in the printer at the same time as printing, refer to
"Printing (P.144)"
.
1
Connect the printer to the PC with a USB cable, and switch the printer to PC
connection mode.
(P.122)
󱾀
Con rm that "Waiting for data..." appears on
the printer's display.
PC Connect
ɻɻ
Waiting for data...
2
Click [Select printer] on the [File] menu.
IMPORTANT
• If the message is displayed, the printer driver installation
has not been completed. Follow steps 15 through 19 in
"Installing the Software
(P.115)
."
• If the same error occurs again, reinstall the printer driver.
(P.111)
.
3
Select the printer to save the data from the [Select printer] drop-down list.
󱾀
The drop-down list will show a list of printer
drivers installed in your environment.