Canon MK5000 - Setting the Cut Length Settings for All Pages

63
Contents
Preparation/
Setup
Print Using a
Computer
Appendix
IndexPrint/SaveInput/Edit
Names of
Components
Maintenance/
Printer Settings
Trouble-
shooting
Setting the Cut Length Settings for All Pages.
You can set the Cut Length settings (Cut Length, Plate Print Area, Alignment, and All line
centering) for all pages at once.
1
Press the [Seg Len] key.
2
Use [ ] or [ ] to select " Batch Setting," and press the [Enter] key.
󱾀
The cut length setting screen will appear.
Cut Length
Plate Print Area
All centering
Batch Setting
3
Use [ ] or [ ] to select "Specify," enter the cut length, and then press the
[Enter] key.
󱾀
The value can be set by entering numbers or
using arrow keys ([
]/[ ]).
󱾀
When you press the [Enter] key, the Plate Print
Ar
ea setting screen appears.
Cut Lengthɻ
ɻɻ

ɻAutomatic
ɻSpecify ʁ 10.0㎜
[ 4.0 to 150.0㎜ ]
4
Use [ ] or [ ] to select the setting and press [Enter] key.
󱾀
Select "Normal" if you want to print on an area
other than the plate.
󱾀
When the Plate Print Area is set to "Expansion,"
the pr
int media is automatically changed to
"Plate." You cannot select any other print media
except plate.
󱾀
Press the [Enter] key, and the alignment setting
scr
een will appear.
Plate Print Areaɻ
ɻ1RUPDO
ɻ([SDQVLRQ