228
Contents
Preparation/
Setup
Print Using a
Computer
Appendix
IndexPrint/SaveInput/Edit
Names of
Components
Maintenance/
Printer Settings
Trouble-
shooting
Print Media
The following print media can be used for printing.
Tube *1
PVC tube ø 1.5 mm to ø 10 mm inside diameter
0.4 mm to 0.6 mm thickness
* With the tube warmer installed: ø 1.5 mm to
ø 6.5 mm inside diameter
Clear tube
Heat shrink tube ø 1.5 mm to ø 10 mm inside diameter
0.2 mm to 0.4 mm thickness
Label tape Cassettes (White, Yellow, Silver) in 6, 9 or 12 mm width,
30 m length (Silver: 27 m length)
Flat tube *1*2 ø 1.5 mm to ø 6.5 mm inside diameter, 11.2 mm or less
width, 0.4 mm to 0.6 mm thickness
Plate *1*2 0.5 mm thickness, 8.0 mm to 10.0 mm width
*1 Please purchase commercially available tubes and plates for use. Also, some commercially
available tubes and plates cannot be printed by this printer. Please test the operation on a given
print media before use.
*2 The optional plate and at tube attachment is required.
System Requirements for Software
Compatible OS Windows 11
Windows 10 (64bit/32bit)
Windows 8.1 (64bit/32bit)
Computer A computer that supports any of the above operating
systems.
Monitor and video driver 1024 x 768 dots resolution,
1280 x 1024 recommended.
Free hard disk space required
for installation (including
temporary le storage)
Application software: 100MB
Printer driver: 100MB
* Disk space requirements are subject to change without
notice.
To Next Page
Loading...
