Canon MK5000 - Adjustment of Printing Results

81
Contents
Preparation/
Setup
Print Using a
Computer
Appendix
IndexPrint/SaveInput/Edit
Names of
Components
Maintenance/
Printer Settings
Trouble-
shooting
Checking the Print Preview
Before printing, you can check the print preview on the display.
1
Display the data to be printed, and press the [Print] key.
2
Use [ ] to select Preview, and then press the [Enter] key.
󱾀
The print preview will be displayed,  owing from
right to left.
Print Preview
ɻɻ
Sets to print: 1
Tube
Range:
All
Љ3. 0ᶳ
200V Pump
• While pressing [ ] or [ ], the display will
stop.
• If you hold down [
], the image will be
displayed in fast forward.
• Press [
] to display the next page.
• Press [Canc] key to cancel preview display.
󱾀
When the preview display  nishes, you will
r
eturn to the printing preference display.
NOT
E
• When you specify the following print media, the line
indicating the width of the print media is not shown in the
preview.
- Tube (ø7 mm to ø10 mm), shrink tube (ø7 mm to ø10
mm), clear tube (ø7 mm to ø10 mm)
- Labels (12 mm)
200V Pump
• The preview may not exactly match the actual print result.