Canon MK5000 - Changing the Auto Power off Settings (Adapter;Battery); Changing the Printer Settings

193
Contents
Preparation/
Setup
Print Using a
Computer
Appendix
IndexPrint/SaveInput/Edit
Names of
Components
Maintenance/
Printer Settings
Trouble-
shooting
Changing the Printer Settings
Changing the Auto Power O Settings (Adapter/Battery)
Change the amount of time that the unit will automatically turn o after a certain period of
inactivity. The auto power o setting can be set for each power source used, and the default
setting for both is "30 min."
1
Press the [Settings] key.
2
Use [ ] or [ ] to select "Others" and press the [Enter] key.
ɻɻ
Settings
Others
Print adjust
Setting
3
Use [ ] or [ ] to select " AutoO (adapter)" (or " AutoO (battery)"), and
then press the [Enter] key.
Others
Clear tube reverse
AutoO (adapter)
AutoO
(battery)
4
Use [ ] or [ ] to select the time until the power is automatically turned o ,
and then press the [Enter] key.
󱾀
You can select the timer setting from "No," "5
min.," "15 min.," and "30 min."
5 min.
15 min.
30 min.
Auto O (Adapter)