Setting Values Description
[Print delivery]
3
[Advanced set-
tings] -> [Sheet
orientation]
[Header up LEF]
Deliver the prints with the header on top side and in portrait
position (vertical).
[Header up SEF]
Deliver the prints with the header on top side and in land-
scape position (horizontal).
[Header down LEF]
Deliver the prints with the header at the bottom side and in
portrait position (vertical).
[Header down SEF]
Deliver the prints with the header at the bottom side and in
landscape position (horizontal).
[Advanced set-
tings] -> [Print
order]
• [Front/back]
Default value. The front page on the front, the back page
on the back.
• [Back/front]
Puts the front page on the back and the back page on the
front.
[Advanced set-
tings] -> [Rota-
tion]
• [0 degrees]
• [180 degrees]
Rotates the prints 180 degrees.
[Output] Settings - [Margin erase]
Setting Values Description
[Margin erase]
[Binding edge] Margins of a document sometimes contain notes
or punch holes, for example. The machine allows
you to hide these elements on the copy. With the +
and - buttons of the [Binding edge] setting you can
define how much margin of the original you want
to erase. You can enter a value up to 100 mm /
3.94".
Description of the Copy Job Settings
Chapter 7 - Carry Out Copy Jobs
229
Canon varioPRINT 135 Series
To Next Page
Loading...
