Setting Values Effect
[Check first set] [On] The machine goes on hold after the first set of a job is
printed. You can check the quality and layout of the first
set before the machine prints the remaining sets.
[Off] The machine will print the whole job without stopping
after the first set.
[As in job] The machine will print the jobs as indicated in the job
ticket.
[Next output tray] [After each job] Each job is sent to the next available output tray. In this
context, the second stack of the stacker is also defined
as an output tray.
[When tray is full] All the jobs are stacked until an output tray is full. When
an output tray is full, the next jobs are sent to the next
output tray.
[Offset stacking] [Jobs] Each printed job that is delivered to an output location is
stacked on top of the previous printed job with an offset.
This helps you to identify the various jobs.
[Sets (always)] Each printed set that is delivered to an output location is
stacked on top of the previous set with an offset. This
helps you to identify the various sets.
[Sets (as in job)] Each printed set is delivered to the output location as de-
fined in the job ticket or copy job. Therefore, the sets can
be stacked in one straight line or with an offset.
[Banners] Each banner page of a job is delivered to the output lo-
cation with an offset. This helps you to identify the sepa-
rate jobs. The jobs themselves are stacked in one
straight line.
[Off] All the printed jobs or sets are stacked in one straight
line. There is no offset between the jobs or sets.
Work with the Workflow Profiles
46
Chapter 4 - Adapt Printer Settings to Your Needs
Canon varioPRINT 135 Series
To Next Page
Loading...
