Canon varioPRINT 110 - Page 46

The Default Settings for [Output]
The default [Output] settings
Workflow profile [Output] settings
[Next output tray] [Offset stacking]
[Standard] [After each job] [Sets (as in job)]
[Job by job] [After each job] [Sets (as in job)]
[Check and print] [After each job] [Sets (as in job)]
[Manual planning] [After each job] [Sets (as in job)]
[Unattended] [When tray is full] [Banners]
Values and effects of the settings
The following table describes the effects of the various values of the settings.
Values and effects of the settings
Setting Values Effect
[Destination of
print job]
[Scheduled jobs] The jobs are immediately sent to the list of [Scheduled
jobs].
[Waiting jobs] The jobs are sent to the list of [Waiting jobs]. You can
manually define the order in which the jobs will be prin-
ted.
[As in job] The jobs are sent to the destination that is defined in the
job ticket or in the copy job.
[Destination of
copy job]
[Scheduled jobs] The jobs are immediately sent to the list of [Scheduled
jobs].
[Waiting jobs] The jobs are sent to the list of [Waiting jobs]. You can
manually define the order in which the jobs will be prin-
ted.
[DocBox] The copy jobs go directly to the [DocBox]. When you
have more than 1 [DocBox] on your system, you can se-
lect the [DocBox] to which the jobs will be sent.
[Destination of
DocBox job]
[Scheduled jobs] The jobs are immediately sent to the list of [Scheduled
jobs].
[Waiting jobs] The jobs are sent to the list of [Waiting jobs]. You can
manually define the order in which the jobs will be prin-
ted.
[Confirm start of
job]
[On] The machine always stops before the next scheduled
job. Touch [Resume] in the dashboard to start each job.
[Off] The machine keeps printing all the jobs. The machine
does not stop before the next scheduled job, unless
there is a reason to stop. For example when a media is
not available.
4
Work with the Workflow Profiles
Chapter 4 - Adapt Printer Settings to Your Needs
45
Canon varioPRINT 135 Series