Cardinal 201 - Page 62

Model 201 Installation & Technical
8400-M117-O1 Rev D
Page 54
PArit= (Parity Setting)
Press the F3/  key to show the current setting. If the setting
displayed is acceptable, press the F3/  key again to save it.
Otherwise, use the F2/ key to toggle to a new setting and then
press the F3/  key to save it. Allowable settings are:
none
None = No Parity
odd
odd = Odd Parity
euen
Even = Even Parity
Stop= (Stop Bits)
Press the F3/  key to show the current setting. If the setting
displayed is acceptable, press the F3/  key again to save it.
Otherwise, use the F2/ key to toggle to a new setting and then
press the F3/  key to save it. Allowable settings are:
1
1 = One Stop Bit
!5
1.5 = One and one half Stop Bits
2
2 = Two Stop Bits
 (Weight Mode)
Press the F3/  key to show the current setting. If the setting
displayed is acceptable, press the F3/  key again to save it.
Otherwise, use the F2/ key to toggle to a new setting and then
press the F3/  key to save it. Allowable settings are:

Weight-On-Demand

SMA Output Format

Computer Output Format

Computer Output Format 2

Off (Weight mode is disabled)