8545-M838-O1 Rev D 825 Installation & Technical
OPERATORS, CONT.
Date/Time:
With the Add Operator screen displayed, the current setting for Date/Time: will be
shown. If the operator is allowed to change the date and time, press the ENTER key to
save the settings and return to the previous screen.
Otherwise, press the SPACE key (or the Y or N key) to toggle between the Yes and No
and then press the ENTER key to save the settings and return to the previous screen.
Config:
With the Add Operator screen displayed, the current setting for Config: will be shown.
If the operator is allowed to change the configuration, press the ENTER key to save the
settings and return to the previous screen.
Otherwise, press the SPACE key (or the Y or N key) to toggle between the Yes and No
and then press the ENTER key to save the settings and return to the previous screen.
File Mgr:
With the Add Operator screen displayed, the current setting for File Mgr: will be
shown. If the operator is allowed to access the File Manager function, press the ENTER
key to save the settings and return to the previous screen.
Otherwise, press the SPACE key (or the Y or N key) to toggle between the Yes and No
and then press the ENTER key to save the settings and return to the previous screen.
To Next Page
Loading...
