CASE CONSTRUCTION Alpha Series - Page 101

3-CONTROLSANDINSTRUMENTS
(18)TEXTDISPLAY:
Thisdisplaywillshowthefollowingduring
normaloperation,asselectedbythe
operator.
•
Enginehours:Enginehourswillalways
bedisplayedmomentarilywhenthe
operatorinitiallysitsintheseat.The
operatormaychoosetoleaveengine
hoursondisplaycontinuouslyorselect
oneofthefollowing.
•
EngineRPM
•
Enginecoolanttemperature(degreesF
orC)
•
Hydraulicoiltemperature(degreesForC)
•
Cycle:Ifthisdisplayoptionischosen,the
displaywillcontinuouslycyclethroughall
fouroftheaboveitems
Thetextdisplaywillalsohelptheoperator
ortechnicianwithinformationasthe“Setup”
menuisutilized.
NOTE:Tochangedisplaymode"onthego"
holdtheAUXOVERRIDE(12)untilthecur-
rentoptionnameisdisplayed,pushtheAUX
OVERRIDEbuttonrepeatedlyuntildesired
optionnameisdisplayed.Thisdisplaymode
valuewillcontinuetobeshownuntilanother
selectionismade.
93109329A7
3-41