CASE CONSTRUCTION Alpha Series - Page 123

3-CONTROLSANDINSTRUMENTS
Tomodifytheownercode:
OnceintheLOCKmenu,thedisplaywillshowOWNER.
PressthePOWERbuttontoentertheOWNERmenu.
Thedisplaywillshowopenfollowedby00000.
1.Enterthecurrentownercodebyusingmultiple
pressesoftheSTARTbutton(2),AUXOVERRIDE
button(4),andOPERATEbutton(3).Pressthe
POWERbutton(5)tosaveeachdigitandmovetothe
next.
NOTE:Fornumbers1,2,3usetheSTARTbutton.
Fornumbers4,5,6usetheAUXOVERRIDEbutton.
Fornumbers7,8,9,0usetheOPERATEbutton.
2.PressthePOWERbutton(5)afterthefthdigittosave
thecode.Thedisplay(1)willshowthewordOWNCR
followedbythesavedownercode.
3.Enteranewownercodetooverwritetheexistingcode.
Thepanelwillreturntothe“Setup”menu.
RAIL15SSL0143CA5
3-63