Case 570NXT - Page 96

4-OPERATINGINSTRUCTIONS
Boosterbatteryprocedurewithoptionaljumppost
1.Sitintheoperator'sseatandhavetheotherperson
maketheconnections.Makesuretheboosterbatter-
iesare12V.
2.Ifusinganothermachineforpower,makesurethetwo
machinesdonottouch.
3.Connectthejumpercablestotheboosterbattery.
4.Removetheredrubberbootfromtheterminalpost.
5.Connectthepositive(+)jumpercabletothepositive
(+)terminalasshown.
6.Connectthenegative(-)jumpercabletotheframe,as
farawayaspossiblefromthepositive(+)cable.
7.Starttheengineandhavetheotherpersondisconnect
thenegative(-)jumpercablerstandthepositive(+)
jumpercablelast.
8.Disconnectthejumpercablesfromtheboosterbattery.
RAPH12FRK1184BA2
4-8