7 - MAINTENANCE
Manutenzione utente (ME2000S)
ME2000S - User Manual
112 - 133
1
2
A
A
7.1.2 Carriage lubrication
The carriage should be lubricated every month (or every 1500 tags).
After having thoroughly cleaned the guide (1) of the X-axis clamp carriage with a cloth to remove the dust, lightly
lubricate it (with just a few drops of oil).
Then move (A) the carriage (2) by hand to distribute the oil evenly and make sure that the carriage runs smoothly.
Contact technical support if you notice any friction while doing this.
Only use liquid synthetic oil with a viscosity of about 60-68 mm2/sec at 40°.
To Next Page
Loading...
