CIM ME2000S - Updates to the Manual; Confidentiality; Recipients

1 - GENERAL INFORMATION
INFORMAZIONI GENERALI
ME2000S - User Manual
8 - 133
1.1.2 Illustrations
The illustrations contained in this manual are up to date at the time of issue.
Due to technical and commercial updates, parts could be tted to the machine referred to in this manual whose external
shape could di󰀨er from the part illustrated even if it has the same function and can be adjusted like those shown.
In case of doubt, contact MF Group srl - CIM division directly for any additional information that you may require.
CAUTION
The illustrations are indicative only and may show the machine with safety devices removed for
clarity of understanding.
WARNING
USE THE MACHINE WITH ALL CASINGS MOUNTED AND SAFETY DEVICES ENABLED.
1.1.3 Purpose of the manual
CAUTION
This document has been prepared in accordance with the regulations in force at the time of
publication.
The purpose of this manual is to provide the Customer with all the information necessary to be able to use and
operate the machine properly, safely and independently.
The manual contains information regarding safety, technical aspects and the operation, maintenance and transport
of the ME2000Smachine.
This document is divided into sections following the natural evolution of the life of the machine, starting from transport
and ending with dismantling / disposal.
CAUTION
Read this manual carefully and meticulously follow the instructions contained in it before using,
inspecting or carrying out any type of operation on the machine.
Proper use and correct maintenance enable the machine to operate correctly and provide lasting performance.
In case of doubt or if you require further information, please contact the nearest technical support centre or contact
MF Group srl - CIM division after-sales service directly.
1.1.4 Keeping the manual
The manual should be kept carefully and close to the machine, in an accessible place that is known to all operators,
protected from liquids and other substances that could a󰀨ect its legibility, and should be readily accessible at any
times.
The manual and Declaration of conformity are integral parts of the machine and therefore must accompany it for
its entire service life.
No part of this document must be removed, torn or arbitrarily modied.
If the manual is lost or becomes illegible, please request a copy from MF Group srl - CIM division.