CIM ME2000S - Installation Precautions and Warnings; Fuse Replacement

5 - INSTALLATION
INSTALLAZIONE (ME)
ME2000S - User Manual
43 - 133
≥ 0,4 m
≥ 0,6 m
0,3 m
0,3 m
0,3 m
0,3 m
5.2 Positioning the machine
Make sure that the place where the machine is to be installed meets the required environmental conditions.
Place the machine on a surface at least 0.6 m from the oor.
Leave a clearance of at least 0.3m between each side of the machine and the closest walls (A) to ensure good
access to the connectors and to allow adequate ventilation.
A space of at least 0.4 m is required in order for the upper guard to be opened (B).
Make sure that the surface on which the machine is placed does not amplify the noise level above the permissible
level (80dB) and that it is strong and solid enough to support the weight of the machine (85 kg).
WARNING AVERTISSEMENT
Do not run the machine in vertical position. Ne faites pas fonctionner la machine en position
verticale.
WARNING AVERTISSEMENT
After installing, the socket-outlet shall be easily
accessible.
Après l’installation, la prise de courant doit être
facilement accessible.
A
B