CIM ME2000S - Misuse

2 - MACHINE DESCRIPTION
DESCRIZIONE DELLA MACCHINA (ME)
ME2000S - User Manual
19 - 133
2.2 Intended use
The ME2000S machine referred to in this document, has been designed for the customisation of metal tags by
embossing.
The machine is designed to be placed on a stable surface in order to remain stationary during use.
The machine is made up of numerous synchronized handling and machining units that produce customised metal tags.
The specications and values that establish the limits for operator safety and the operational e󰀩ciency of the machine
are indicated in the technical data section and in the attached drawings.
During its normal and reasonably foreseeable use, the machine should only be used:
• for the use indicated in the technical specication regarding normal operation (list price data and contractual
specications) described in this manual
• with the intended tags, which are listed in the technical specication.
WARNING
The use and maintenance of the machine is restricted to operators whose skills can be identied
in section 1.
The machine must be used exclusively in workplaces that comply with the environmental characteristics
indicated in the technical data section. It is also required that the machine will be used with all the xed
guards properly installed, the movable guards closed and all safety devices working correctly.
The machine is intended exclusively for professional users and not for consumers.
2.2.1 Improper use
Improper use means the incorrect use of the machine, which, although resulting in potential accidents, may cause
serious damage to the machine itself.
Modifying or adjusting the machine in order to obtain a performance that is higher or di󰀨erent to that provided by the
manufacturer is considered IMPROPER USE. The manufacturer therefore declines all liability for injury to persons
or damage to property and the machine warranty shall be deemed invalidated.
CAUTION
Any other use of the machine not described in this manual or not previously authorized by MF
Group srl - CIM division exempts the manufacturer from any liability
WARNING AVERTISSEMENT
Equipment is not suitable for use in locations
where children are likely to be present.
Cet équipement ne convient pas à une utilisation
dans des lieux pouvant accueillir des enfants.
WARNING AVERTISSEMENT
The appliance is NOT designed or intended for
use by children.
L’appareil n’est PAS conçu ni destiné à être
utilisé par des enfants.
WARNING AVERTISSEMENT
This appliance must be used by skilled persons
only.
Cet appareil doit être utilisé uniquement par
des personnes qualiées.