1 - GENERAL INFORMATION
Dati Costruttore
ME2000S - User Manual
12 - 133
1.3 Manufacturer identication data
For repairs, servicing, spare part requests or technical and commercial information, contact the Manufacturer at:
Manufacturer
MF Group srl - CIM division
Address
Via O. Serra, 2 - Calderara di Reno
40012 BOLOGNA - ITALY
www.cimitaly.it
info@cimitaly.it
CAUTION
When contacting us, please indicate the type, serial number and year of construction of the
machine, which can be found on the machine’s data tag.
1.4 Disclaimer
The Manufacturer is responsible for the machine in its initial conguration.
The use of non-original spare parts, modications to the machine, the installation of any accessories that are not
provided or authorised and carrying out maintenance in a manner that does not comply with the instructions in this
manual will relieve the Manufacturer of any liability for personal injury or damage to property.
The Customer is responsible for providing a suitable and well-functioning work environment in which the machine
is to be installed and for employing competent personnel.
Acceptance of the machine expressly commits the Customer to keep it unchanged and not to remove, move or
make its protective devices, guards and safety devices, partially or completely ineective.
Any defect must be reported to the Manufacturer.
1.5 Technical support
To request technical support, please contact the Manufacturer at: cimtech@cimitaly.it - techsupport-usa@cimusainc.com
1.6 Spare parts
In order to avoid changes being made to the technical features of the machine, it is recommended that you use
original spare parts.
Otherwise, the manufacturer declines any responsibility for damage to the machine, property and/or injuries.
WARNING
It is recommended that you use original spare parts and accessories.
In addition to reducing the service life and performance of the machine, the use of non-original
parts and accessories, will also invalidate the guarantee.
To Next Page
Loading...
