1 - GENERAL INFORMATION
INFORMAZIONI GENERALI
ME2000S - User Manual
9 - 133
1.1.5 Updates to the manual
The information, descriptions and illustrations contained in this manual reect the state of the art at the time the
machine was put on the market.
In order to constantly improve its products and/or for commercial reasons, the Manufacturer reserves the right to
make changes to the machines for technical or commercial reasons, at any time and without prior notice and without
legitimizing the Purchaser to terminate the contract.
In the event that it becomes necessary to integrate, modify and/or update the contents of this manual due to
modications to a machine installed at the Customer's premises, the Manufacturer will provide the updated and
revised sections.
The user is responsible for replacing all their copies with those containing the new revision following the instructions
received together with the updated documents.
1.1.6 Condentiality
Technical information (texts, drawings and illustrations) contained in this manual are the property of MF Group srl
- CIM division and are of a condential nature.
It is strictly forbidden to distribute, reproduce or translate this document, even partially, without the written consent
of MF Group srl - CIM division.
1.1.7 Recipients
CAUTION
This manual is not in any way intended as a substitute for the specic technical training that the
operators should have previously acquired by working on similar machines or the experience
they could gain on this machine under the guidance of qualied personnel.
The topics dealt with in this document are addressed to the safety manager of the facility in which the machine is
installed and to specic operators (installers, maintenance personnel etc.), whose roles have been dened so that
they can work safely on the machine.
This manual is intended for personnel in charge of carrying out the following operations:
• transport and handling
• installation
• production
• adjustments
• cleaning
• maintenance and repair
To Next Page
Loading...
