3 - SAFETY
SICUREZZA
ME2000S - User Manual
33 - 133
3.2 Machine operator skills
The machine should only be used by people who have been suitably instructed on how to use it and who have been
adequately trained by an expert.
The machine operator must be able to identify the power sources that can cause injury and\or damage and be able
to take the necessary precautions to avoid contact or involuntary exposure to these energy sources.
The machine operator must NOT have access to the internal parts of the machine that are protected by panels
xed with screws.
3.3 Operating the machine in maintenance\repair mode (technician)
In order to carry out maintenance, an authorized technician may need to temporarily disable the safety system that
prevents the machine from functioning when the moveable guard is open.
This function is available via a special password-protected menu in the management software.
DANGER!
THIS MODE IS RESTRICTED TO EXPERT AND AUTHORIZED USERS ONLY
Take all the necessary precautions to ensure that the password allowing the safety devices to be disabled is not
given to unqualied personnel.
If you think that unauthorized persons may have become aware of the password, change it immediately (refer to
the technical manual or contact the Manufacturer's technical support service).
WARNING
MF Group srl - CIM division declines all liability for damage or injury to people, things or animals
due to user failure to comply with the precautions indicated above and in particular due to the
use of the machine by unauthorized personnel with the safety devices disabled
To Next Page
Loading...
