10
Enter Setup
2564 Barcode Scanner User Guide
Upon powering up, the scanner will try to establish a connection with the BT cradle or a computer
with Bluetooth
®
wireless technology. Refer to Chapter 3 Setting up a WPAN Connection for details.
The connection between the scanners and the cradle is made easy and reliable.
Note: If RS-232, USB Virtual COM or BT SPP is selected for output interface, the host can
directly send serial commands to configure the scanner. For example, run
HyperTerminal.exe and type the 6-digit command located under each setup
barcode. Refer to Appendix II Host Serial Commands.
To Next Page
Loading...
