A-262 Cisco 7000 Hardware Installation and Maintenance
MIP Interface Cable Pinouts
Table A-18 E1 Interface Cable Pinouts
MIP End Network End
DB-15
1
1. Any pins not described in this table are not connected.
BNC DB-15 Twinax RJ-45
Pin Signal
2
2. Tx = transmit. Rx = receive.
Signal Pin Signal Pin Signal Pin Signal
9 Tx tip Tx tip 1 Tx tip Tx-1 Tx tip 1 Tx tip
2 Tx ring Tx shield 9 Tx ring Tx-2 Tx ring 2 Tx ring
10 Tx shield – 2 Tx shield Shield Tx shield 3 Tx shield
8 Rx tip Rx tip 3 Rx tip Rx-1 Rx tip 4 Rx tip
15 Rx ring Rx shield 11 Rx ring Rx-2 Rx ring 5 Rx ring
7 Rx shield – 4 Rx shield Shield Rx shield 6 Rx shield
To Next Page
Loading...
