B-270 Cisco 7000 Hardware Installation and Maintenance
Interface Processor LEDs
The following sequence indicates that the CIP is waiting for commands from the RP.
On warm boots, the LEDs flash briefly. On downloads, the following three LED sequences apply;
the first indicates that the system is downloading volatile programmable logic device (VPLD) code:
The following sequence indicates that the CIP is downloading microcode:
The following sequence indicates that the CIP is starting to execute the microcode:
Present Loaded Signal Online
Port 1 On On Off Off
Port 0 Off Off Off Off
Present Loaded Signal Online
Port 1 On On On On
Port 0 On On Off Off
Present Loaded Signal Online
Port 1 On On On On
Port 0 On On On On
Present Loaded Signal Online
Port 1 Off Off Off Off
Port 0 Off Off Off Off
Present Loaded Signal Online
Port 1 On On On On
Port 0 On On On Off
Present Loaded Signal Online
Port 1 Off Off Off Off
Port 0 On On On On
Present Loaded Signal Online
Port 1 Off Off Off Off
Port 0 Off Off Off Off
To Next Page
Loading...
