Cisco 7000 Hardware Installation And Maintenance

1-60 Cisco 7000 Hardware Installation and Maintenance
Functional Overview
If the target hardware version is different from the actual hardware version, a warning message
appears when you boot the router, indicating that there is a disparity between the target hardware and
the actual hardware. You will still be able to load the new image; however, contact a service
representative for information about upgrades and future compatibility requirements.

Cisco 7000 Specifications

General

Product Type	Switch
Model	7000
Category	Switch
Ports	Varies by configuration
Power Supply	Redundant power supplies supported
Management	SNMP, CLI