Cisco 7906G Administration Guide

4-11
Cisco Unified IP Phone 7906G and 7911G Administration Guide for Cisco Unified CallManager 5.1
OL-11515-01
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Network Configuration Menu
DNS Server 1
DNS Server 2
DNS Server 3
DNS Server 4
DNS Server 5
Primary Domain Name System
(DNS) server (DNS Server 1) and
optional backup DNS servers
(DNS Server 2–5) used by the
phone.
1. Unlock network configuration options.
2. Set the DHCP Enabled option to No.
3. Scroll to the appropriate DNS Server
option, press the Edit softkey, and then
enter a new DNS server IP address.
4. Press the Validate softkey.
5. Repeat Steps 3 and 4 as needed to assign
backup DNS servers.
6. Press the Save softkey.
Operational
VLAN ID
Auxiliary Virtual Local Area
Network (VLAN) configured on a
Cisco Catalyst switch in which the
phone is a member.
If the phone has not received an
auxiliary VLAN, this option
indicates the Administrative
VLAN.
If neither the auxiliary VLAN nor
the Administrative VLAN are
configured, this option is blank.
The phone obtains its Operational VLAN ID
via Cisco Discovery Protocol (CDP) from the
switch to which the phone is attached. To
assign a VLAN ID manually, use the Admin
VLAN ID option.
Admin. VLAN
ID
Auxiliary VLAN in which the
phone is a member.
Used only if the phone does not
receive an auxiliary VLAN from
the switch, ignored otherwise.
Overrides the value specified by
the Operation VLAN ID option.
1. Unlock network configuration options.
2. Scroll to the Admin. VLAN ID option,
press the Edit softkey, and then enter a
new Admin VLAN setting.
3. Press the Validate softkey and then press
the Save softkey.
Table 4-2 Network Configuration Menu Options (continued)
Option Description To Change

Cisco 7906G Specifications

General

Brand	Cisco
Model	7906G
Category	IP Phone
Language	English