Cisco 7906G Administration Guide

Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Network Configuration Menu
4-12
Cisco Unified IP Phone 7906G and 7911G Administration Guide for Cisco Unified CallManager 5.1
OL-11515-01
DHCP Enabled Indicates whether DHCP is being
used by the phone.
1. Unlock network configuration options.
2. Scroll to the DHCP Enabled option and
press the No softkey to disable DHCP, or
press the Yes softkey to enable DHCP.
3. Press the Save softkey.
DHCP Address
Released
Releases the IP address assigned
by DHCP.
1. Unlock network configuration options.
2. Scroll to the DHCP Address Released
option and press the Ye s softkey to
release the IP address assigned by DHCP,
or press the No softkey if you do not want
to release this IP address.
3. Press the Save softkey.
Alternate TFTP Indicates whether the phone is
using an alternative TFTP server.
1. Unlock network configuration options.
2. Scroll to the Alternate TFTP option and
press the Yes softkey if the phone should
use an alternative TFTP server. Press the
No softkey otherwise.
3. Press the Save softkey.
Table 4-2 Network Configuration Menu Options (continued)
Option Description To Change

Cisco 7906G Specifications

General

Brand	Cisco
Model	7906G
Category	IP Phone
Language	English