Cisco Catalyst 3560X-24P

2-493
Catalyst 3750-X and 3560-X Switch Command Reference
OL-21522-02
Chapter 2 Catalyst 3750-X and 3560-X Cisco IOS Commands
sdm prefer
Switch# reload
This example shows how to configure the routing template on a switch running the IP base or IP services
feature set:
Switch(config)# sdm prefer routing
Switch(config)# exit
Switch# reload
This example shows how to configure the dual IPv4-and-IPv6 default template on a switch:
Switch(config)# sdm prefer dual-ipv4-and-ipv6 default
Switch(config)# exit
Switch# reload
This example shows how to change a switch template to the default template.
Switch(config)# no sdm prefer
Switch(config)# exit
Switch# reload
You can verify your settings by entering the show sdm prefer privileged EXEC command.
Related Commands Command Description
show sdm prefer Displays the current SDM template in use or displays the templates that can
be used, with approximate resource allocation per feature.