Cisco Catalyst 4500 Series Configuration Guide

44-40
Software Configuration Guide—Release IOS XE 3.3.0SG and IOS 15.1(1)SG
OL-25340-01
Chapter 44 Configuring 802.1X Port-Based Authentication
Configuring 802.1X Port-Based Authentication
Cisco ACS Configuration for DACL
Note Only Cisco ACS supports DACL.
To ensure correct functioning of the ACS configuration required for DACL, follow these steps:
Step 1 Configure a downloadable IP ACL on the window that appears when you select
Radius Shared Profile > Downloadable IP ACL Content (Figure 44-10).
Figure 44-10 Shared Profile Components
Step 2
Attach this downloadable ACL with the USER on the window that appears when you select User >
DACLs (Figure 44-11).
Figure 44-11 Downloadable ACLs
URL-Redirect
To configure URL-direct, you need to configure it on the ACS, and on the switch.

Cisco Catalyst 4500 Series Specifications

General

Series	Catalyst 4500 Series
Category	Switch
Layer Support	Layer 2, Layer 3
Form Factor	Modular chassis
Stackable	No
Chassis Slots	3, 6, 7, 10
Power Supply Options	AC, DC
Redundancy	Power supply, Supervisor engine
Network Management	Cisco IOS Software CLI, SNMP, Cisco Prime Infrastructure
Features	Security, QoS
Port Density	Up to 384 ports per chassis
Security Features	802.1X, ACLs, DHCP Snooping, Dynamic ARP Inspection, IP Source Guard
Supervisor Engine	8-E