Cisco Catalyst 4500 Series - Default Chapter; Enabling IGMP Snooping Globally; Enabling IGMP Snooping on a VLAN

25-6
Software Configuration Guide—Release IOS XE 3.3.0SG and IOS 15.1(1)SG
OL-25340-01
Chapter 25 Configuring IGMP Snooping and Filtering
Configuring IGMP Snooping
Enabling IGMP Snooping Globally
To enable IGMP snooping globally, perform this task:
This example shows how to enable IGMP snooping globally and verify the configuration:
Switch# configure terminal
Switch(config)# ip igmp snooping
Switch(config)# end
Switch# show ip igmp snooping
Global IGMP Snooping configuration:
-----------------------------------
IGMP snooping : Enabled
IGMPv3 snooping : Enabled
Report suppression : Enabled
TCN solicit query : Disabled
TCN flood query count : 2
Vlan 1:
--------
IGMP snooping : Enabled
IGMPv2 immediate leave : Disabled
Explicit host tracking : Enabled
Multicast router learning mode : pim-dvmrp
CGMP interoperability mode : IGMP_ONLY
Vlan 2:
--------
IGMP snooping : Enabled
IGMPv2 immediate leave : Disabled
Explicit host tracking : Enabled
Multicast router learning mode : pim-dvmrp
CGMP interoperability mode : IGMP_ONLY
Enabling IGMP Snooping on a VLAN
To enable IGMP snooping on a VLAN, perform this task:
Command Purpose
Step 1
Switch# configure terminal
Enters global configuration mode.
Step 2
Switch(config)# [no] ip igmp snooping
Enables IGMP snooping.
Use the no keyword to disable IGMP snooping.
Step 3
Switch(config)# end
Exits configuration mode.
Step 4
Switch# show ip igmp snooping | include
Verifies the configuration.
Command Purpose
Step 1
Switch(config)# [no] ip igmp snooping vlan vlan_ID
Enables IGMP snooping.
Use the no keyword to disable IGMP snooping.
Step 2
Switch(config)# end
Exits configuration mode.
Step 3
Switch# show ip igmp snooping vlan vlan_ID
Verifies the configuration.