44-114
Software Configuration Guide—Release IOS XE 3.3.0SG and IOS 15.1(1)SG
OL-25340-01
Chapter 44 Configuring 802.1X Port-Based Authentication
Displaying Authentication Details
Displaying Authentication Details
This section includes these topics:
• Determining the Authentication Methods Registered with the Auth Manager, page 44-114
• Displaying the Auth Manager Summary for an Interface, page 44-114
• Displaying the Summary of All Auth Manager Sessions on the Switch, page 44-114
• Displaying a Summary of All Auth Manager Sessions on the Switch Authorized for a Specified
Authentication Method, page 44-115
• Verifying the Auth Manager Session for an Interface, page 44-115
• Displaying MAB Details, page 44-117
• EPM Logging, page 44-117
Determining the Authentication Methods Registered with the Auth Manager
This example show how to display the registered authentication methods:
Enter the following:
Switch# show authentication registrations
Handle Priority Name
3 0 dot1x
2 1 mab
1 2 webauth
Displaying the Auth Manager Summary for an Interface
In the following example, MAB was configured for a higher priority (lower value) than 802.1X:
Switch# show authentication int gi1/5
Client list:
Interface MAC Address Method Domain Status Session ID
Gi1/5 000f.23c4.a401 mab DATA Authz Success 0A3462B10000000D24F80B58
Gi1/5 0014.bf5d.d26d dot1x DATA Authz Success 0A3462B10000000E29811B94
Available methods list:
Handle Priority Name
3 0 dot1x
2 1 mab
Runnable methods list:
Handle Priority Name
2 0 mab
3 1 dot1x
Displaying the Summary of All Auth Manager Sessions on the Switch
This example shows how ti display the summary of all sessions:
Switch# show authentication sessions
Interface MAC Address Method Domain Status Session ID
Gi1/48 0015.63b0.f676 dot1x DATA Authz Success 0A3462B1000000102983C05C
Gi1/5 000f.23c4.a401 mab DATA Authz Success 0A3462B10000000D24F80B58
Gi1/5 0014.bf5d.d26d dot1x DATA Authz Success 0A3462B10000000E29811B94
To Next Page
Loading...
