EasyManuals Logo

Cisco Catalyst 4500 Series Configuration Guide

Cisco Catalyst 4500 Series
1610 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #477 background imageLoading...
Page #477 background image
15-29
Software Configuration Guide—Release IOS XE 3.3.0SG and IOS 15.1(1)SG
OL-25340-01
Chapter 15 Configuring VLANs, VTP, and VMPS
VLAN Membership Policy Server
Troubleshooting Dynamic Port VLAN Membership
VMPS errdisables a dynamic port under the following conditions:
The VMPS is in secure mode, and it does not allow the host to connect to the port. The VMPS
errdisables the port to prevent the host from connecting to the network.
More than 50 active hosts reside on a dynamic port.
For information on how to display the status of interfaces in error-disabled state, refer to
Chapter 8, “Checking Port Status and Connectivity. To recover an errdisabled port, use the
errdisable recovery cause vmps global configuration command.
Dynamic Port VLAN Membership Configuration Example
Figure 15-4 on page 15-30 shows a network with a VMPS servers and VMPS client switches with
dynamic ports. In this example, these assumptions apply:
The VMPS server and the VMPS client are separate switches.
The Catalyst 4000 family Switch 1 (running Catalyst Operating System) is the primary VMPS
server.
The Catalyst 6000 family Switch 3 (running Catalyst Operating System) and the URT are secondary
VMPS servers.
End stations are connected to these clients:
Catalyst 4500 series XL Switch 2 (running Catalyst Cisco IOS)
Catalyst 4500 series XL Switch 9 (running Catalyst Cisco IOS)
The database configuration file is called Bldg-G.db and is stored on the TFTP server with the IP
address 172.20.22.7.

Table of Contents

Other manuals for Cisco Catalyst 4500 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco Catalyst 4500 Series and is the answer not in the manual?

Cisco Catalyst 4500 Series Specifications

General IconGeneral
SeriesCatalyst 4500 Series
CategorySwitch
Layer SupportLayer 2, Layer 3
Form FactorModular chassis
StackableNo
Chassis Slots3, 6, 7, 10
Power Supply OptionsAC, DC
RedundancyPower supply, Supervisor engine
Network ManagementCisco IOS Software CLI, SNMP, Cisco Prime Infrastructure
FeaturesSecurity, QoS
Port DensityUp to 384 ports per chassis
Security Features802.1X, ACLs, DHCP Snooping, Dynamic ARP Inspection, IP Source Guard
Supervisor Engine8-E

Related product manuals