Cisco Catalyst 4500 Series - Page 1383

CHAPTER
61-1
Software Configuration Guide—Release IOS XE 3.3.0SG and IOS 15.1(1)SG
OL-25340-01
61
Configuring NetFlow-lite
Note NetFlow-lite is only supported on the Catalyst 4948E and Catalyst 4948E-F Ethernet switches in IP Base
or higher.
This chapter describes how to configure NetFlow-lite, which provides traffic monitoring capabilities
similar to those provided through NetFlow.
The following topics are included:
• About NetFlow Packet Sampling, page 61-2
• Feature Interaction, page 61-2
• Configuring NetFlow Packet Sampling, page 61-2
• Display Commands, page 61-8
• Clear Commands, page 61-9
Note For complete syntax and usage information for the switch commands used in this chapter, first look at
the Cisco Catalyst 4500 Series Switch Command Reference and related publications at this location:
http://www.cisco.com/en/US/products//hw/switches/ps4324/index.html
If the command is not found in the Catalyst 4500 Series Switch Command Reference, it will be found in
the larger Cisco IOS library. Refer to the Cisco IOS Command Reference and related publications at this
location:
http://www.cisco.com/en/US/products/ps6350/index.html
Note VLAN monitors are not supported in Cisco IOS Release 15.0(2)SG.
Note Refer to the NetFlow Solutions Guide for more detailed information on NetFlow usage and management.