70-5
Software Configuration Guide—Release IOS XE 3.3.0SG and IOS 15.1(1)SG
OL-25340-01
Chapter 70 Configuring MIB Support
Enabling SNMP Support
Step 3 Configure the router to generate notifications. You can use keywords to limit the number and types of
messages generated.
Router (config)# snmp-server enable traps [notification-type] [notification-option]
Step 4 (Optional) Configure the router to generate SNMP notifications released to field replaceable units
(FRUs):
Router (config)# snmp-server enable traps fru-ctrl
Step 5 (Optional) Configure the router to generate SNMP notifications related to environmental monitoring:
Router (config)# snmp-server enable traps envmon
To Next Page
Loading...
