Index
IN-2
Catalyst 4500 Series Switch Cisco IOS Software Configuration Guide
OL-23818-01
configuring 17-7
access VLANs 17-5
accounting
with RADIUS
44-108
with TACACS+ 3-16, 3-21
ACEs
ACLs
51-2
IP 1-35, 51-2
Layer 4 operation restrictions 51-10
ACEs and ACLs 48-1
ACL assignments, port-based authentication 44-20
ACL assignments and redirect URLs, configure 44-38
ACL configuration, displaying a Layer 2 interface 51-32
ACLs
ACEs
51-2
and SPAN 55-5
and TCAM programming for Sup 6-E 51-10
and TCAM programming for Sup II-Plus thru
V-10GE
51-6
applying IPv6 ACLs to a Layer 3 interface 51-17
applying on routed packets 51-26
applying on switched packets 51-25
compatibility on the same switch 51-3
configuring with VLAN maps 51-25
CPU impact 51-12
downloadable 46-7
hardware and software support 51-6
IP, matching criteria for port ACLs 51-4
MAC extended 51-14
matching criteria for router ACLs 51-3
port
and voice VLAN
51-4
defined 51-3
processing 51-12
selecting mode of capturing control packets 51-7
troubleshooting high CPU 51-6
types supported 51-3
understanding 51-2
VLAN maps 51-5
ACLs, applying to a Layer 2 interface 51-31
ACLs and VLAN maps, examples 51-19
acronyms, list of A-1
action drivers, marking 40-20
activating and deactivating a capture point,
Wireshark
56-10
activating and deactivating Wiresharkcapture points,
conceptual, Wireshark
56-6
active queue management 40-9
active queue management via DBL, QoS on Sup
6-E
40-33
active traffic monitoring, IP SLAs 66-1
adding members to a community 14-9
addresses
displaying the MAC table
4-37
dynamic
changing the aging time
4-23
defined 4-21
learning 4-22
removing 4-24
IPv6 52-2
MAC, discovering 4-37
See MAC addresses
static
adding and removing
4-29
defined 4-21
address resolution 4-37
adjacency tables
description
33-2
displaying statistics 33-9
administrative VLAN
REP, configuring
22-9
administrative VLAN, REP 22-8
advertisements
LLDP
1-6, 29-2
advertisements, VTP
See VTP advertisements
aggregation switch, enabling DHCP snooping
50-9
aging time
MAC address table
4-23