Cisco Catalyst 4500 Series - Page 1604

Index
IN-38
Catalyst 4500 Series Switch Cisco IOS Software Configuration Guide
OL-23818-01
description 40-4
trace command 8-10
traceroute
See IP traceroute
See Layer 2 Traceroute
traceroute mac command
8-12
traceroute mac ip command 8-12
tracked lists
configuring
57-3
types 57-3
tracked objects
by Boolean expression
57-4
by threshold percentage 57-6
by threshold weight 57-5
tracking interface line-protocol state 57-2
tracking IP routing state 57-2
tracking objects 57-1
tracking process 57-1
track state, tracking IP SLAs 57-9
traffic
blocking flooded
53-2
traffic control
using ACLs (figure)
51-4
using VLAN maps (figure) 51-5
traffic marking procedure flowchart 40-20
traffic shaping 40-9
translational bridge numbers (defaults) 15-5
traps
configuring MAC address notification
4-24
configuring MAC move notification 4-26
configuring MAC threshold notification 4-28
configuring managers 60-11
defined 60-3
enabling 4-24, 4-26, 4-28, 60-11
notification types 60-11
overview 60-1, 60-4
troubleshooting
with CiscoWorks
60-4
with system message logging 58-1
with traceroute 8-9
troubleshooting high CPU due to ACLs 51-6
trunk failover
See link-state tracking
trunk ports
configure port security
47-17
configuring PVLAN 42-19 to 42-21
trunks
802.1Q restrictions
17-4
configuring 17-5
configuring access VLANs 17-5
configuring allowed VLANs 17-5
default interface configuration 17-5
enabling to non-DTP device 17-3
specifying native VLAN 17-5
understanding 17-3
trustpoint 65-3
tunneling
defined
27-1
tunnel ports
802.1Q, configuring
27-6
described 27-2
incompatibilities with other features 27-5
TwinGig Convertors
limitations on using
7-14
port numbering 7-13
selecting X2/TwinGig Convertor mode 7-14
type length value
See TLV
type of service
See TOS
U
UDLD
configuring probe message interval
per-interface
30-8
default configuration 30-4
disabling on fiber-optic interfaces 30-7