Contents
xxix
Software Configuration Guide—Release IOS XE 3.3.0SG and IOS 15.1(1)SG
OL-25340-01
CHAPTER
39 Configuring VRF-lite 39-1
About VRF-lite 39-2
Default VRF-lite Configuration 39-3
VRF-lite Configuration Guidelines 39-4
Configuring VRFs 39-5
Configuring VRF-Aware Services 39-5
Configuring the User Interface for ARP 39-6
Configuring the User Interface for PING 39-6
Configuring the User Interface for SNMP 39-7
Configuring the User Interface for uRPF 39-7
Configuring the User Interface for Syslog 39-8
Configuring the User Interface for Traceroute 39-8
Configuring the User Interface for FTP and TFTP 39-8
Configuring the User Interface for Telnet and SSH 39-9
Configuring the User Interface for NTP 39-9
Configuring Per-VRF for TACACS+ Servers 39-9
Configuring Multicast VRFs 39-11
Configuring a VPN Routing Session 39-12
Configuring BGP PE to CE Routing Sessions 39-12
VRF-lite Configuration Example 39-13
Configuring Switch S8 39-14
Configuring Switch S20 39-16
Configuring Switch S11 39-16
Configuring the PE Switch S3 39-16
Displaying VRF-lite Status 39-17
CHAPTER
40 Configuring Quality of Service 40-1
Overview of QoS 40-1
Prioritization 40-2
QoS Terminology 40-3
Basic QoS Model 40-5
Classification 40-6
Classification Based on QoS ACLs 40-6
Classification Based on Class Maps and Policy Maps 40-7
Policing and Marking 40-8
Queueing and Scheduling 40-8
Active Queue Management 40-9
Sharing Link Bandwidth Among Transmit Queues 40-9
To Next Page
Loading...
