Contents
xli
Software Configuration Guide—Release IOS XE 3.3.0SG and IOS 15.1(1)SG
OL-25340-01
Examples of ACLs and VLAN Maps 51-19
Applying a VLAN Map to a VLAN 51-21
Using VLAN Maps in Your Network 51-22
Denying Access to a Server on Another VLAN 51-23
Displaying VLAN Access Map Information 51-24
Using VLAN Maps with Router ACLs 51-25
Guidelines for Using Router ACLs and VLAN Maps on the Same VLAN 51-25
Examples of Router ACLs and VLAN Maps Applied to VLANs 51-25
ACLs and Switched Packets 51-25
ACLs and Routed Packets 51-26
Configuring PACLs 51-27
Creating a PACL 51-27
PACL Configuration Guidelines 51-28
Removing the Requirement for a Port ACL 51-28
Configuration Restrictions 51-29
Debugging Considerations 51-29
Webauth Fallback 51-29
Configuring IPv4, IPv6, and MAC ACLs on a Layer 2 Interface 51-29
Using PACL with Access-Group Mode 51-30
Configuring Access-group Mode on Layer 2 Interface 51-31
Applying ACLs to a Layer 2 Interface 51-31
Displaying an ACL Configuration on a Layer 2 Interface 51-32
Using PACL with VLAN Maps and Router ACLs 51-32
Configuring RA Guard 51-35
Introduction 51-35
Deployment 51-36
Configuring RA Guard 51-36
Examples 51-37
Usage Guidelines 51-38
CHAPTER
52 Support for IPv6 52-1
Finding Feature Information 52-1
About IPv6 52-1
IPv6 Addressing and Basic Connectivity 52-2
DHCP 52-3
Security 52-3
QoS 52-3
Management 52-4
Multicast 52-4
To Next Page
Loading...
