Contents
xlv
Software Configuration Guide—Release IOS XE 3.3.0SG and IOS 15.1(1)SG
OL-25340-01
CHAPTER
58 Configuring System Message Logging 58-1
About System Message Logging 58-1
Configuring System Message Logging 58-2
System Log Message Format 58-2
Default System Message Logging Configuration 58-3
Disabling Message Logging 58-4
Setting the Message Display Destination Device 58-5
Synchronizing Log Messages 58-6
Enabling and Disabling Timestamps on Log Messages 58-7
Enabling and Disabling Sequence Numbers in Log Messages (Optional) 58-7
Defining the Message Severity Level (Optional) 58-8
Limiting Syslog Messages Sent to the History Table and to SNMP (Optional) 58-9
Configuring UNIX Syslog Servers 58-10
Logging Messages to a UNIX Syslog Daemon 58-10
Configuring the UNIX System Logging Facility 58-11
Displaying the Logging Configuration 58-12
CHAPTER
59 Onboard Failure Logging (OBFL) 59-1
Prerequisites for OBFL 59-1
Restrictions for OBFL 59-2
Information About OBFL 59-2
Overview of OBFL 59-2
Information about Data Collected by OBFL 59-2
OBFL Data Overview 59-2
Temperature 59-3
Operational Uptime 59-4
Interrupts 59-7
Message Logging 59-8
Default Settings for OBFL 59-9
Enabling OBFL 59-9
Configuration Examples for OBFL 59-10
Enabling OBFL Message Logging: Example 59-10
OBFL Message Log: Example 59-10
OBFL Component Uptime Report: Example 59-11
OBFL Report for a Specific Time: Example 59-11
CHAPTER
60 Configuring SNMP 60-1
About SNMP 60-1
To Next Page
Loading...
