Chapter 5 Web GUI Setup and Monitoring
If User String is selected as the Announce Title Source, enter
the SAP identifier (ID)/string, up to 31 characters.
5 Click OK.
Configuring Forw ard Error Correction Settings
Due to its nature (occasionally packet loss, packet reordering, and/or stream jitter) a
traditional IP network is not the perfect channel for transmitting broadcast-quality
compressed video content. Forward Error Correction (FEC) developed by the Pro-
MPEG forum is a unique technology to enhance the robustness of video traffic over
IP networks. The D9824 supports Pro-MPEG FEC Code of Practice (COP) #3 release2
and SMPTE-2022, which is based on the exclusive or (XOR) boolean operator applied
to a number of data packets. When a FEC packet is created by performing the XOR
boolean operation on a number of RTP packets, a missing RTP packet can always be
reconstructed by performing the XOR operation on the FEC packet and the
remaining RTP packets.
 FEC = RTP1 XOR RTP2
 RTP1 = FEC XOR RTP2
 RTP2 = FEC XOR RTP1
1 In the MPEG over IP Output Stream page, select the stream you want to
configure FEC settings.
2 Click FEC. The FEC Settings dialog box is displayed.
3 From the FEC Mode drop-down list, choose an error protection profile.
To Next Page
Loading...
Need help?
General
