Cisco D9824 User Manual

Chapter 1 Introduction
6
The diagram below shows an example of the D9824 receiver used in an MPE
application.
MPEGoIP Input
The MPEGoIP input allows a decoder to process User Datagram Protocol (UDP) or
Real-time Transport Protocol (RTP)-encapsulated MPEG transport streams
(protected streams) from the IP/Ethernet network. The incoming stream is either
MPTS or Single Program Transport Stream (SPTS).
The diagram below shows an example of the D9824 receiver receiving MPEGoIP
transport streams:

Cisco D9824 Specifications

General

Brand	Cisco
Model	D9824
Category	Receiver
Language	English