Cisco D9824 User Manual

Appendix A
Technical Specifications
364
Power and General Specifications
General
Item
Specification
LCD
2 lines of 40 characters, backlit LCD.
Keypad
Arrow keys, 0 to 9, SELECT, MENU, INFO,
ADV, MAP, APPLY and NAV keys.
LEDs
Green LED for Signal status. Red LED for Alarm
indication.
Power
AC Power Connector
Item
Specification
Type of connector
IEC 320 style C14 appliance receptacle
AC input
100 to 240 VAC, 50/60 Hz
Power (without LNB)
50W typ
Current (without LNB)
0.45A @ 240 VAC typical, 0.7A @ 120 VAC
typical
Power Quality
ANSI/IEEE Std C62.41.1-2002
Power
To operate the receiver, you must connect it to an AC power source.
WARNING:
Make sure that at least one end of the power cable(s) remains easily accessible for
unplugging, if you need to switch off the unit. For example: Ensure that the socket
outlet is installed near the product.
WARNING:
To avoid electrical shock, connect the three-prong plug on this product to an earth-
grounded three-pin socket outlet only.

Cisco D9824 Specifications

General

Brand	Cisco
Model	D9824
Category	Receiver
Language	English