Cisco D9824 - MPE Output; Mpegoip Input (D9824 with FEC Only); ASI Input

Appendix A
Technical Specifications
360
MPE Output
Item
Specification
Number of Outputs
2
Type of connector
RJ-45, 100/1000BASE-T
Output modes
IPv4 datagrams
IP Addressing
Multicast or Unicast
TS Input
up to 5 PIDs
Bit Rate
up to 10 Mbps (for 1500 byte packets)
MPEGoIP Input (D9824 with FEC only)
Item
Specification
Number of inputs
2
Type of connector
RJ-45, 100/1000BASE-T
Redundancy modes
Manual or Auto
IP Addressing
Multicast or Unicast
TS Streaming
1 MPTS or SPTS
TS Bit Rate
1 to 180 Mbps descrambling
1 to 80 Mbps decoding
MPEGoIP bit rate
Up to 206 Mbps
FEC Support
Yes (according to pro-MPEG FEC COP #3 and
SMPTE-2022)
ASI Input
Item
Specification
Number of inputs
1
Type of connector
75 ohms BNC
Output impedance
75 ohms according to EN 50083-9
Data amplitude
800 mV peak-peak ± 10% according to EN 50083-
9
Return loss
>17 dB, 27 to 270 MHz