Cisco D9824 - Setting up for Network Connection

Setting up for Network Connection
13
Setting up for Network Connection
1 Press MENU to display the Main menu.
2 Press to go to the Setup menu. Press SELECT. Press twice to select the IP
menu. Press SELECT twice to go to the IP menu.
3 Use the arrow keys to navigate up and down the IP menu, and the arrow
keys to move across the IP menu to set the IP Address, Mask and Gateway
parameters. Use the number keys to directly enter numbers in the fields. For
more information on keypad operation, see Keypad Convention.
4 Press SELECT each time to save the changes. Press MENU four times to return
to the startup screen.