Cisco D9824 User Manual

Chapter 5 Web GUI Setup and Monitoring
182
Configuring the Common Interface (CI) Information
1 From the user interface of the D9824, choose Input > CI Setup. The CI Setup
page is displayed.
2 Choose Enable from the CI CAM QUERY Support drop-down list to query the
CAM prior to decryption to ensure that the card can be decrypted. The default is
Disable.
3 Choose Enable from the CI CAM Auto Reset drop-down list to automatically
reset the card. The default is Disable.
4 From the CA List Management Type drop-down list, choose whether the
Common Interface List Management should add and delete (AddDel) individual
programs or update all (UpdateAll) the programs when the list changes.
Note: Updating all the programs will cause temporary loss of service for all the
programs when another is being modified.

Cisco D9824 Specifications

General

Brand	Cisco
Model	D9824
Category	Receiver
Language	English