Chapter 5 Web GUI Setup and Monitoring
1 From the user interface of the D9824, choose Transport Stream > Digital
Program Mapping under MPEG over IP Output. The Digital Program Mapping
page is displayed.
2 For each DPM Program Entry, it displays the input channel number (Chl #) and
channel name (Name), whether the PE is passed, dropped, or mapped (Action),
the output channel (Output Ch#), and the PMT PID (PMT PID).
Note: Any changes made to the MOIP DPM values automatically changes the
Mode Status to Edited by User in the MPEG over IP Output page.
3 Click the PE1 to PE32 program entry radio button you want to edit.
To Next Page
Loading...
